|
Order Status
All our custom products are
made to order based on customer's needs and desires. New or altered artwork may
take longer to create to meet your requests. Upon receipt of your payment, the
average time to make and ship is within 2 - 3 day time period. This may change
due to high rate of volume.
Material and Product Care
Our grips are
made from high impact acrylic and are custom
contoured to each model.
They
have an ultra slim profile, lighter than the next
competitors and have been
field tested for durability! We use a specialized process
enabling us to transfer high resolution images onto acrylic grips.
Each set of grips
comes with a set of instructions for easy installment and care.
We do not recommend using superglues,
Thread Lock or any solvents for cleaning the grips as these products
can damage the acrylic. Gun oils and lubricants are ok to use and
will not affect the grips. We highly recommend removing the grips
BEFORE cleaning your weapon.
Warranty
We offer a 30 day warranty which covers
manufacturing defects. Please follow instructions provided with each
package to ensure proper installation. See
our
Return
Policy
for more information.
SPD Paintball Marker Grips
The paintball
gun grips are .125 inches thick and we provide
screws with every pair. Some grips
require a window to see the OLED/LCD screen or the LED light so be sure to
select the right grips from the drop down if you need this feature when
ordering. This is not an actual cutout in the grip as paint and
debris would get inside. The OLED/LCD is a clear window in the
artwork so that you can read the screen. The LED is a clear circle
in the artwork which allows the LED light to shine thru. For lighter colored
grips the LED is an option but not always necessary as the light
will shine thru anyway.
Due to the fact that SPD's
Grips are flat panels, these grips
will
NOT fit on any guns
with a solenoid or any other
part that sticks out of the
grip frame such as the Luxe
or Karnivore.
***
When ordering E Blade Paintball Grips the
stock pancake solenoid must be removed
in order for our grips to fit properly
on the frame. There are aftermarket
modification kits such as the MQ Valve
that will eliminate the pancake
solenoids.
SPD Pistol
Gun Grips
Our Pistol Gun Grips are cut from acrylic material ranging from .125 inches thick to .250 depending on the width of the stock grips.
Screws are not included
with our pistol gun grips. Your stock screws and bushings will
work.
Due to the many variations of 1911 pistols if you are not
certain of a proper fit PLEASE CONTACT US BEFORE YOU PURCHASE!
Because our pistol grips are made
from acrylic a back plate is necessary ONLY for the gun frames that are
Ambidextrous. Meaning the firearm has safety
levers on BOTH sides of the frame. These grips are clearly indicated in the drop down box as 1911 Fullsize Ambi, Magwell Ambi, Compact Ambi, Sig Sauer P238 Ambi and Sig Sauer P938 Ambi.
All the pistol grips, with the
exception of the those with a Magwell, have a notch cutout at the bottom to
accommodate the pin. Magwell grips have a straight cut across the bottom of the
grips.
Not all pistols are the same even if
they are made by the same manufacturer. Some pistols take the full size 1911
grips whereas some will only take the Compact grips. Compact grips are shorter
and stockier then their counterparts and hole distance is NOT the same. We
highly recommend measuring your hole distance if you unsure which grips to
order.
Hole distance for each pistol grip
is as follows:
-
1911 Fullsize Left Side Safety - 78 mm center of hole
to center of hole, approximately 3
1/16 inches
-
1911 Fullsize Ambi Safety Lever both sides - 78 mm center of hole to
center of hole, approximately 3 1/16
inches
-
1911 Bobtail - 78 mm center of hole
to center of hole, approximately 3
1/16 inches
-
1911 Magwell Left Side Safety - 78 mm center of hole to center of hole, approximately 3 1/16 inches
-
1911 Magwell Ambi Safety Lever both sides - 78 mm center of hole to center of hole, approximately 3 1/16 inches
-
1911 Compact Carry Left Side Safety - 68 mm center of hole to center of hole, approximately 2 11/16 inches
-
1911 Compact Carry Ambi Safety Lever both sides - 68 mm center of hole to center of hole, approximately 2 11/16 inches
-
Ruger 22/45 for series Lite, Threaded Barrel and Target - 78 mm center of hole to center of hole, approximately 3 1/16 inches
-
Sig Sauer P238 - 55 mm center of
hole to center of hole,
approximately 2 3/16 inches
-
Sig Sauer P238 Ambi - 55 mm center
of hole to center of hole,
approximately 2 3/16 inches
-
Sig Sauer C3 1911 Magwell Compact -
68 mm center of hole to center of
hole, approximately 2 11/16 inches
Again, please contact us
before you purchase if you unsure of fit to avoid any issues with
returns, etc.
EMAIL -
info@stingerpaintballdesigns.com
PHONE - (828) 837-7690 | 
