|
Order Status
All our custom products are
made to order based on customer's needs and desires. New or altered artwork may
take longer to create to meet your requests. Upon receipt of your payment, the
average time to make and ship is within 2 - 3 day time period. This may change
due to high rate of volume.
Material and Product Care
Our grips are made from high
impact acrylic and are custom contoured to each model. They have an ultra slim
profile, lighter than the next competitors and have been field tested for
durability! We use a specialized process enabling us to transfer high resolution
images onto acrylic grips.
Each set of grips
comes with a set of instructions for easy installment and care.
We do not
recommend using superglues, Thread Lock or any solvents for cleaning
the grips as these products can damage the acrylic. Gun oils and
lubricants are ok to use and will not affect the grips. We highly
recommend removing the grips BEFORE cleaning your weapon.
Warranty
We offer a 30 day warranty
which covers manufacturing defects. Please follow instructions provided with
each package to ensure proper installation. See
our
Return
Policy
for more information.
SPD Paintball Marker Grips
The paintball gun grips are .125
inches thick and we provide screws with every pair. Some grips require a window
to see the OLED/LCD screen or the LED light so be sure to select the right grips
from the drop down if you need this feature when ordering. This is not an actual
cutout in the grip as paint and debris would get inside. The OLED/LCD is a clear
window in the artwork so that you can read the screen. The LED is a clear circle
in the artwork which allows the LED light to shine thru. For lighter colored
grips the LED is an option but not always necessary as the light will shine thru
anyway.
Due to the fact that SPD's Grips are
flat panels, these grips will
NOT fit on any guns with a
solenoid or any other part that sticks
out of the grip frame such as the Luxe
or Karnivore.
***
When ordering E Blade Paintball Grips
the stock pancake solenoid must be
removed in order for our grips to fit
properly on the frame. There are
aftermarket modification kits such as
the MQ Valve that will eliminate the
pancake solenoids.
SPD Pistol
Gun Grips
Our Pistol Gun Grips are cut from
acrylic material ranging from .125 inches thick to .250 depending on the width
of the stock grips.
Screws are not included with our
pistol gun grips. Your stock screws and bushings will work.
Due to the many variations of
1911 pistols if you are not certain of a proper fit PLEASE CONTACT US BEFORE YOU
PURCHASE!
Because our pistol grips are made
from acrylic a back plate is necessary ONLY for the gun frames that are
Ambidextrous. Meaning the firearm has safety levers on BOTH sides of the frame.
These grips are clearly indicated in the drop down box as 1911 Fullsize Ambi, Magwell
Ambi, Compact Ambi and Sig Sauer P238 Ambi.
All the pistol grips, with the
exception of the those with a Magwell, have a notch cutout at the bottom to
accommodate the pin. Magwell grips have a straight cut across the bottom of the
grips.
Not all pistols are the same even if
they are made by the same manufacturer. Some pistols take the full size 1911
grips whereas some will only take the Compact grips. Compact grips are shorter
and stockier then their counterparts and hole distance is NOT the same. We
highly recommend measuring your hole distance if you unsure which grips to
order.
Hole distance for each pistol grip
is as follows:
-
1911 Fullsize Left Side Safety - 78 mm center of hole
to center of hole, approximately 3
1/16 inches
-
1911 Fullsize Ambi Safety Lever both sides - 78 mm center of hole to
center of hole, approximately 3 1/16
inches
-
1911 Bobtail - 78 mm center of hole
to center of hole, approximately 3
1/16 inches
-
1911 Magwell Left Side Safety - 78 mm center of hole to center of hole, approximately 3 1/16 inches
-
1911 Magwell Ambi Safety Lever both sides - 78 mm center of hole to center of hole, approximately 3 1/16 inches
-
1911 Compact Carry Left Side Safety - 68 mm center of hole to center of hole, approximately 2 11/16 inches
-
1911 Compact Carry Ambi Safety Lever both sides - 68 mm center of hole to center of hole, approximately 2 11/16 inches
-
Ruger 22/45 for series Lite, Threaded Barrel and Target - 78 mm center of hole to center of hole, approximately 3 1/16 inches
-
Sig Sauer P238 - 55 mm center of
hole to center of hole,
approximately 2 3/16 inches
-
Sig Sauer P238 Ambi - 55 mm center
of hole to center of hole,
approximately 2 3/16 inches
-
Sig Sauer C3 1911 Magwell Compact -
68 mm center of hole to center of
hole, approximately 2 11/16 inches
Again, please contact us
before you purchase if you unsure of fit to avoid any issues with
returns, etc.
EMAIL -
info@stingerpaintballdesigns.com
PHONE - (828) 837-7690 |
